| 邁瑞WS-350無鉛波峰焊技術參數表 Specifications |
| 規格表 Specifications | 型 號 WS-350 |
| 外形尺寸 Dimension:L*W*H(mm) | 4500 X 1400 X 1700 |
| 重量 Weight(kg) | Approx.2300kg |
| 電源 Power Supply | 3P5W,380/220V 50Hz 63A |
| 啟動功率 Startup Power (kw) | 26kw |
| 正常運行功率 Operation Power Consumption | 10kw |
| 控制系統 Control System | 電腦(computer)+PLC |
| 噴霧系統 Spray System |
|
| 傳動方式 Transmission Methed | Step motor 汽缸、步進馬達 |
| 噴霧氣壓 Spray Pressure | 0.25Mpa--0.4Mpa |
| 助焊劑流量控制 Flux flow | 10--100ml/min |
| 助焊劑自動添加 Auto Fill Flux | standard |
| 抽風方式 Exhaust Methed | 上/下抽風 Up & down exhaust |
| 抽風管直徑 Exhaust Ducting Diameter | Φ200mm |
| 排風量 Exhaust Capacity | 25m3/min |
| 預熱系統 Preheating System |
|
| 預熱方式 Preheating Mode | 紅外/微熱風(選項) Hot air/IR tube is option |
| 溫度控制方式 Control Mode | PID + SSR |
| 預熱區數量 Preheating Zoon Number | 4 |
| 預熱區長度 Preheating Length | 1800mm-2000mm |
| 預熱溫度控制范圍 Preheating Temp. | Room Temperature-250℃ |
| 預熱升溫時間 Warm-up Time(min) | Approx.15min (setting 150℃) |
| 熱風馬達 Blow Motor | Standard |
| 運輸系統 |
|
| 寬度范圍 PCB Width (L X W)(mm) | Min:80x60; Max:500x350 |
| PCB傳送方向 Conveyor Direction | 左到右 (L→R);右到左(R→L)OPT |
| 運輸速度范圍 Conveyor Speed(mm/min) | 0-2000 |
| 運輸高度 Conveyor Height (mm) | 750+/-20 |
| 允許PCB元件高度 Available Component Height(mm)★ | 上 Top 120(option 160)下 Bottom 15 |
| 速度控制方式 Conveyor Speed Control Mode | 變頻器閉環無級調速 Closed loop |
| 爪片 Finger | 雙排鏈快換雙鉤爪(標配) Quick-change finger(standard) |
| 鈦片鴨嘴爪(選配) Titanium duck jaw finger(option) |
| 彈簧鴨嘴爪(選配) Spring duck jaw finger(option) |
| 金屬鴨嘴爪(選配) Metallic duck jaw finger(option) |
| 樹脂鴨嘴爪(選配) Resinous duck jaw finger(option) |
| 導軌角度 Conveyor Angle | 4~7度 |
| 焊接系統 Soldering system |
|
| 錫爐工作方式 Solder Pot style | 機械式 Motor drive |
| 錫爐材質 Solder Pot Material | 全鈦 Full Titanium (標配 ST) |
| 波峰調節方式 Wave Height Adjust | 電腦數字控制 Digital control by PC |
| 錫爐發熱管功率 heater power | 380VAC 10KW |
| 錫爐最高溫度 solder pot temperature | 300℃ |
| 錫爐容量 solder pot capacity | lead-free 400kg |
| 波峰驅動功率 wave drive power | 2kw 220v |
| 錫爐升溫時間 solder por warm-up temperature | Approx.180min(setting 250℃) |
| 爐溫控制方式 temperature control mode | PID + SSR |
| 冷卻系統 cooling system |
|
| 冷卻方式 cooling method | 強制風冷/水冷機(選配) forced air/air chiller(option) |
| 其他 other |
|
| 洗爪 finger cleaning system | 毛刷 brush |
|
|
| ★ The bottom height is 11mm for machine with Nitrogen |
| 氮氣機板底允許高度為11mm. |
|
